-40%
Gamewell Shunt Pin 1/4in by 1 7/8in for setting the loop mils
Gamewell Shunt Pin 1/4in by 1 7/8in for setting the loop mils
Gamewell Shunt Pin 1/4in by 1 7/8in for setting the loop mils
Gamewell Shunt Pin 1/4in by 1 7/8in for setting the loop mils
Gamewell Shunt Pin 1/4in by 1 7/8in for setting the loop mils
Gamewell Shunt Pin 1/4in by 1 7/8in for setting the loop mils

Gamewell Shunt Pin 1/4in by 1 7/8in for setting the loop mils

$ 5.28

Availability: 49 in stock
  • Condition: The were removed from service tarnished. I ran them through a vibratory tumbler with crushed walnut shells to clean them. Please see pictures and ask if you have any questions
  • All returns accepted: ReturnsNotAccepted
  • Country/Region of Manufacture: United States

    Description

    These brass pins were used in the central alarm receiving room to test and to set the loop mils, also to assign the circuit to a specific register
    or group. they are 1/4" x 7/8in long brass with an overall length of 1 7/8"
    By purchasing this item you do hereby acknowledge that you are familiar with the proper operation and safety precautions and will fully follow the manufacturer's recommended instructions for the safe and proper use of this item. To my customers, please note your satisfaction is very important to me, if there is any reason you can not give us the best possible rating and positive feedback, please contact me through eBay so the issue can be resolved.
    We only ship to paypal verified addresses, please do not ask us to ship to a different address